This arrow sliding interior barn door wheel and hanger is perfect for anyone having a look to install a DIY barn door at a reasonable price. Plus save on the shipping costs and get a single piece track by purchasing your track at your local Lowes, Home Depot, or other home improvement store! Track thickness will wish to be 3/16″. Width and length may vary, then again 1.5″ wide track is what comes in our complete kits. General rule for track length is that it must be double the width of your door plus 4″ for door stops. So if you door is 48″ your track will wish to be a minimum of 100″. Mounting hardware includes eight each of 5/16″ x 4.5″ Long Lag Bolts, 1-5/8″ Wall spacers & wall washers. Four 5/16″ x 1-1/2″ Lag Bolts to attach hangers to door. Two 2″ angle iron end stops. Two anti-jump safety clips to with 5/16″ x 1-1/2″ Lag bolts to prevent derailment. Two floor mounted door guide with screws. *If your door is wider than 1-7/8″ please let us know so we will send a wider door guide* All hardware is made of quality USA steel and will also be painted or left as raw steel. The barn door hanger is a 14″ tall x 1.5″ wide x 3/16″ thick and comes with a 3″ x 1-1/4″ cast iron wheel. (Once installed on the track, the length is 10″ from the bottom of the wheel to the bottom of the strap) The holes to attach the hangers to the door are located .5″ from the bottom and 6″ from the bottom and take a 5/16″ bolt. Hardware and track not included. If you wish to have these hangers with hardware and/or the track, take a look at our other listings.
Perfect for DIY Sliding Barn Doors – 2 Doors
Hangers are raw steel – Paint desired color/finish or leave as raw steel for rustic look
Made From Quailty Steel in the us – 200 Pound Capacity Per Door
Hardware works with doors of 1-1/4″ to 2-1/4″ Thickness – For Wider Doors, Please Contact Us
Purchase the track locally in a single piece